To install new gutters across Whidbey Island (Oak Harbor, Coupeville, Freeland, Clinton) and Anacortes, WA, Wind Proof Roofing LLC removes the old system and inspects fascia boards and roof edges. The crew then fits custom seamless gutters in corrosion-resistant aluminum or steel, with downspouts placed to protect the foundation and siding. Gutter guards are available on request, and each project starts with a free inspection and a clear scope.
What new gutter installation from Wind Proof Roofing includes
New gutter installation from Wind Proof Roofing LLC follows a defined scope. It is not a quick swap of parts. The company's gutter service starts with full removal of old or damaged gutter systems. Next comes a careful inspection of the fascia boards and roof edges that the new gutters will hang from.
Aluminum vs. steel gutters: material trade-offs to discuss before installation
Gutter material for a new installation on Whidbey Island or in Anacortes comes down to two options from Wind Proof Roofing: corrosion-resistant aluminum and corrosion-resistant steel. Neither choice is right for every house. Which one fits depends on the roofline, the look you want, your budget and the specific product.
| Decision | What Wind Proof Roofing offers | Questions to ask before choosing |
|---|---|---|
| Aluminum gutters | Corrosion-resistant aluminum option | Which profile and color fit my fascia and trim? How will the runs be fastened? |
| Steel gutters | Corrosion-resistant steel option | Is steel a better fit for my roofline or my roof material? Which finish is quoted? |
| Seamless vs. sectional | Custom seamless gutters sized for heavy rainfall | How many continuous runs will my house need, and where do corners and joins fall? |
| Downspouts | Downspouts placed to protect the foundation and siding | Where will each downspout discharge, and does that move water away from walls and walkways? |
| Gutter guards | Available on request to reduce clogging from pine needles, moss and leaves | Is a guard priced separately? How does it affect cleaning access for my trees? |
How to choose gutter contractors on Whidbey Island and in Anacortes
Choosing gutter contractors in Oak Harbor, Anacortes, Coupeville, Freeland or Clinton is easier with a short checklist. Searching for "gutter companies in my area" will return many names. The questions below help separate one gutter installer from another, using facts you can check yourself.
Wind Proof Roofing LLC is a registered Washington construction contractor under L&I registration WINDPPR816P1. You can confirm that number with the Washington L&I contractor lookup. The company is rated 4.7 out of 5 on Google as of 2026-10-05. Owner Bruno Cantoli has 16+ years of hands-on experience and started roofing at 15 years old. He stays directly involved in projects from inspection through completion. More background is on the about page.
- Can I verify the contractor's Washington registration myself?
- Does the scope include removing the old gutters and inspecting the fascia?
- Are the gutters seamless and sized for the roof area they drain?
- Is the material named (aluminum or steel), along with its profile and color?
- Are downspout locations shown or described?
- Will the same person who inspected the house stay involved through completion?
Comparing gutter installation quotes: what a written estimate should show
Gutter installation quotes are only comparable when they describe the same scope. Before comparing totals from local rain gutter installers, line up each estimate against the same list. One quote may include removal, fascia repairs and guards while another leaves them out.
- Removal and disposal of the existing gutters and downspouts
- Inspection of fascia boards and roof edges, and how any hidden damage will be handled and priced
- Gutter material (aluminum or steel), profile, color and seamless or sectional construction
- Total linear run and number of corners
- Number of downspouts, where they are placed and where they discharge
- Gutter guards: included, optional or not offered
- Drip edge or roof-edge work, if any is needed where the gutter meets the roof
- Clean-up of the work area
- Items the quote excludes, such as repairs found once old gutters come off
Step-by-step sequence for a rain gutter installation
A rain gutter installation by Wind Proof Roofing follows a sequence built on the steps the company lists for its gutter service. Exact order and timing depend on the house, the material and what turns up during removal. Some steps, such as fascia repair and fitting new runs, can overlap along different sides of the house.
- Free inspection of the existing gutters, fascia boards and roof edges, with a clear scope and recommendations
- Agreement on material, profile, downspout locations and any gutter guards
- Full removal of the old or damaged gutter system
- Careful inspection of the exposed fascia and roof edge, and repair of any damage found, if agreed
- Fabrication and fastening of custom seamless gutter runs sized for heavy rainfall
- Installation of downspouts placed to protect the foundation and siding
- Gutter guards fitted if they are part of the scope
- Final check of the runs and downspouts, followed by clean-up
Gutter installation mistakes that cause rework
Many gutter installation problems that cause rework can be traced to decisions made before the first bracket goes up. Whether you hire Wind Proof Roofing or another of the gutter installation contractors near you, watch for these points in the scope.
- Hanging new gutters on fascia that was never inspected once the old system came off
- Comparing quotes that list different materials, run lengths or downspout counts as if they matched
- Placing downspouts where they empty against the foundation, siding or a walkway
- Skipping a decision on gutter guards when the house sits under trees that drop needles or leaves
- Replacing gutters right before a roof replacement without coordinating the roof edge
- Approving a quote that says nothing about removal, disposal or excluded repairs
Coordinating new gutters with a roof replacement, roof repair or flat roof
New gutters and the roof edge work as one system. Wind Proof Roofing LLC handles both under the same company. Its services include gutter installation, architectural asphalt shingle roofing, roof repair, standing seam metal roofing, roof installation, and flat and low-slope roofing.
Preparing your home and local practicalities for gutter installation in Oak Harbor, Anacortes and South Whidbey
Preparing your home for gutter installation in Oak Harbor, Anacortes, Coupeville, Freeland or Clinton takes a few simple steps. Ask the installer which of them apply to your house before the work date.
- Note where water overflows or pools during rain, and take photos if you can
- Clear planters, furniture and stored items from along the walls under the rooflines
- Move vehicles away from driveways that sit under a gutter run
- Keep pets inside while work is happening around the house
- Mention any known soft spots in fascia or trim during the inspection
Frequently asked questions
How much should it cost to install a gutter?
The cost to install a gutter depends on the scope, so no single price applies to every house. The main factors are the total length of the runs, whether you choose aluminum or steel, and how many downspouts are needed. Removal of old gutters, fascia repairs and gutter guards also affect the total. Wind Proof Roofing LLC provides a free inspection with a clear scope, so you can price your own house rather than an average.
Can I install new gutters myself?
You can install new gutters yourself if you are comfortable working at roof height and can judge slope, fastening and downspout placement. Keep in mind that custom seamless gutters are formed to length, which a typical DIY project cannot replicate. Fascia damage hidden behind old gutters also needs inspection. For those reasons, many homeowners compare a professional quote before deciding.
What is the rule of thumb for gutters?
The general rule of thumb for gutters is to size them for the roof area and rainfall they drain. They should slope toward the downspouts and empty water away from the foundation and siding. Exact sizing and pitch depend on the roof and the product. Wind Proof Roofing LLC sizes its custom seamless gutters for heavy rainfall and places downspouts to protect the foundation.